audio-technica AT-LP8X Semi-Automatic Direct-Drive Turntable

AT-LP8X 半自動直接傳動唱盤機 - 精準遇上效能 提升您的黑膠體驗 AT-LP8X 是一款半自動直接驅動式唱盤，配備全新設計的唱臂升降裝置，能夠在唱片播放結束時自動抬起唱臂並停止電機。其J型鋁製唱臂靈感源自20世紀60年代與70年代的經典A-T型號，搭載全新設計的 AT-LT10唱頭殼及配有0.3 x 0.7密耳橢圓形針尖的 AT-VM95E BK（黑色）唱頭。這項配置提供卓越的聲道分離度和低失真，帶來出色的音質。針尖可更換或替換為 VM95 系列中的任一其他款式，方便個人化。唱臂的垂直循跡角度（VTA）調節和子配重設計，使其能夠使用各種其他唱頭。 AT-LP8X 支援播放 33-1/3、45和78轉的唱片。其25mm橡膠減震、抗諧振壓鑄鋁轉盤配備2.5mm橡膠墊，由感測器監控的馬達驅動，確保轉盤旋轉速度持續準確。電機及其高效的內部開關電源均安裝在由16mm中密度纖維板（MDF）製成的箱體基座中，並配有高度可調的腳墊，以有效隔絕噪音和振動。唱盤隨附可拆式RCA輸出線（雙RCA公頭對雙RCA公頭接地線）、45轉轉接器以及可拆式鉸鏈式防塵蓋。 產品特徵: *半自動直接傳動唱盤，支援三種轉速：33-1/3轉、45轉 和 78轉* *配備速度感應系統，確保轉盤旋轉速度準確無誤 *全新設計的低扭力直驅式直流伺服電機，提升抗抖動與顫振性能 *25mm橡膠減震、抗共振壓鑄鋁轉盤，搭配2.5mm橡膠墊 *J型唱臂，配備可調式垂直循跡角度（VTA） *全新設計的唱臂升降裝置，唱片播放結束時自動抬起唱臂並停止電機 *AT-VM95E BK（黑色）唱頭（0.3 x 0.7密耳橢圓形針尖），相容於VM95系列任何替換針尖，滿足不同預算與體驗的廣泛選擇 *全新設計的輕量化AT-LT10唱頭蓋 *附有子配重件，可擴展唱頭/唱頭殼重量範圍至14.0克至23.5克 *全新設計的內部開關電源，專為音訊效能最佳化 *中密度纖維板（MDF）的箱體結構 *以唱頭電平輸出，提供純淨、直接的唱頭訊號傳輸 *配備可拆卸的 RCA 輸出線（雙RCA公頭對雙RCA公頭帶接地線）、45轉 接器及可拆式鉸鍊式防塵蓋 *需要專用SP唱頭或替換 AT-VMN95SP 唱針才能播放 78轉 唱片 AT-LP8X Audio-Technica expands its line of direct-drive turntables with the semi-automatic AT-LP8X, featuring a newly designed tonearm lift that automatically raises the tonearm at the end of a record side and stops the motor. The turntable’s J-shaped aluminum tonearm, inspired by classic A-T models of the 1960s and ’70s, comes equipped with a newly designed AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. For easy customization, the stylus can be replaced or interchanged with any of the five additional styli in the VM95 line, and the tonearm’s VTA (vertical tracking angle) adjustment and subcounterweight enable the use of a broad range of other cartridges. The AT-LP8X plays 33-1/3, 45, and 78 RPM records. Its 25 mm rubber-damped, anti-resonance, die-cast aluminum platter comes with a 2.5 mm rubber mat and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed. The motor and its efficient internal switching power supply are housed within a box plinth constructed of 16 mm MDF (medium density fiberboard) and equipped with height-adjustable feet for excellent protection against unwanted noise and vibration. The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover.