Pathos Logos MKII Tube Hybrid Integrated Amplifier
Pathos Logos MKII Tube Hybrid Integrated Amplifier
Pathos Logos MKII Tube Hybrid Integrated Amplifier
Pathos Logos MKII Tube Hybrid Integrated Amplifier
Pathos Logos MKII Tube Hybrid Integrated Amplifier

Pathos Logos MKII Tube Hybrid Integrated Amplifier

數量

簡介

+
來自義大利的 Pathos Logos MKII 是一款頂級的「膽石混合」合併式放大器(Hybrid Integrated Amplifier),它完美結合了真空管的溫潤音色與晶體管的強勁驅動力。這款機型是前代經典 Logos 面世十多年後的重大升級版,不但在電路設計上大刀闊斧進行優化,在外觀工藝和功能擴充性上亦達到了現代 Hi-End 音響的新高度。 核心技術與聲學設計 • 膽前石後架構:前級採用全平衡 A 類線路,配置兩支 ECC88 (6922) 真空管負責電壓放大,帶出極具韻味、絲滑的人聲與弦樂;後級則採用強烈偏置的 MOSFET 晶體管 A/B 類放大,提供極佳的動態與瞬態反應。 • 強悍的輸出功率:在 8 歐姆負載下每聲道輸出 110W,當阻抗降至 4 歐姆時,輸出更可線性倍增至 220W,能輕鬆駕馭大食、低阻抗的苛刻揚聲器。 • 重量級重料供電:機身重達 28 公斤 (約 62 磅),主要是因為內置了一個巨型、經樹脂封裝的雙單聲道獨立繞線變壓器,並配備 4 支義大利製、總容量高達 88,000µF 的濾波電容,提供源源不絕的純淨能量與扎實的低頻下潛。 • 高精度數控模擬音控:捨棄傳統容易產生雜音的碳膜電位器,改用純電阻網絡(Resistive Volume Control)配合 100 階數位控制,確保左右聲道絕對平衡、阻抗恆定,且聲音毫無數碼異味。 義大利極致美學工藝 • PATHOS 字樣散熱片:機身兩側的散熱鰭片直接經雷射切割、陽極氧化處理,拼寫出品牌「PATHOS」字樣,將功能性部件轉化為極具視覺衝擊的標誌性設計。 • 原木與鏡面交織:面板與專屬遙控器均採用高檔的**紅木(Padauk wood)**裝飾。真空管後方更設有機面鍍鉻鏡面,折射出膽管運作時的微紅光芒,奢華而優雅。 • 玻璃背板細節:機身背板打破傳統,採用透明或黑色**有機玻璃(Plexiglass)**打造,盡顯 Hi-End 器材對內部結構與細節的自信。 現代化的實用功能 • 獨立輸入電平調節:用家可以為不同的輸入源(例如 CD 機、串流播放器)單獨調整輸入 Gain(增益),這樣在切換不同音源時,音量就不會忽大忽小。 • 可升級數碼模組(HiDac):用家可額外選配高規格的 DAC 解碼板(支援 24bit/192kHz),加入 USB 和 S/PDIF 同軸/光纖輸入,完美對接高清數碼音樂與電腦串流。 • Hall 效應安全保護:全新引入霍爾效應(Hall Effect)傳感器保護電路,能瞬間感應短路或過載,在不犧牲一絲音質的前提下,全方位保護放大器與你珍貴的喇叭。

商品詳情

Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music.

E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII.

Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music.

Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thinked in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device.

Care for details

As regards the first kind of solutions adopted in the new Logos we find an increased voltage of anodic polarization of the valves in order to optimize the working point of the same and obtain greater linearity and thus a general improvement of the sound in particular an increase of the consistency and definition.

Stabilized power supply for preamp valve and a more accurate collocation of electrolytic capacitors throughout the signal path (and in particular close to each mosfet) allow to have a valuable reserve of “quick energy” that while listening they mean better dynamics, detail and sense of rhythm.

A comfortable listening

Numerous innovations also regarding the practicality of use that they assist pleasantly the owner in the use of the amplifier, we find: volume levels can be stored for each input, the gain differentiation between digital and analog inputs so as to ensure homogeneity of the a level between the different sources used, standby function from the remote control respectful of energy consumption limits imposed by the latest EEC regulations.

Digital music

The ability to have an optional high quality DAC 32bit-384Khz integrated into the device enriches the set of connections with the addition of 2 SPIDF digital inputs and 1 USB type B for computers input, which allow a really meaningful versatility in the management of digital sources and let Logos MkII stand as an ideal amplifier for the use of digital Music.

Expected snags!

A new protection has also been implemented against short circuits and overloads by a “Hall” effect sensor that allows the device to protect itself against shorts caused by speakers and by internal malfunctions, preserving in this case also the speakers and at the same time without diminishing the quality of the musical signal.

Prose

Logos is a hybrid amplifier of 110W per channel into 8 ohms and 220W into 4 ohms with ECC88 preamp valves, end-stage class A / B Mosfet strongly polarized, fully balanced signal until the valve that allows you to take full advantage of a balanced source as Pathos Digit and Pathos Endorphin, volume control purely resistive analog circuitry with digital control and input and output impedance constant, lamellar transformer resin and encapsulated to zero dispersions, brightness display adjustable and all functions remote controlled.

你可能感興趣的商品